instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
1. 서론
나노복합소재(Nano-composite)란 두 가지 이상의 나노입자들을 조합하여 각 재료들의 물리적, 화학적 성질을 합쳐 놓은 재료로서, 구성재료의 장점을 최대한 이용하여 성능을 개선시키고 특성을 서로 조합하여 원하는 특성을 얻을 수 있게 설계한 소재이다. 나노는 10-9m를 나타내는 수치로 머리카
has more strong light intensity than single chip WLED, but process is too complicate and not cost effective. And electron transfer is slow caused by 2-dimensional chip.
2. RGB-LED Nano Wire ??
Existed RGB-LED structure is 3-chip structure(emit red, green, blue) and mixture structure that constructed with One single chip(emit blue light) and different size quantum dots(emit light by
Nanolithography(DPN)기술이다.
2. Dip-pen lithography의 원리
앞서 기술한 AFM(atomic force microscope)은 대기 중에서 측정할 때 tip과 표면 사이에 아주 작은 모세관이 형성된다. 이는 실제 표면을 분석하는데 어려움을 주고 있다. 하지만 이를 이용하여 기판과 tip에 존재하는 분자들의 화학적 결합을 통하여 기판
1)R.O Membrane type
역삼투압 방식에 사용하는 막을 만드는 재료로 주로 사용되는 것은 셀룰로오스 아세테이트와 아로마틱 폴리아마이드 두 가지 종류가 있다. 여기에 더해 막의 성능 향상을 위하여 기본적인 재료에 다른 종류의 단위체를 섞어 막을 제작하기도 한다.
먼저 셀룰로오스 아세테이트 계열
개발된 실리케이트 보다 강도 등의 기계적 물성, 색안정성, 내수 안정성 등이 우수하나 내마모성이 떨어지고 경화시 수축율이 큰 단점이 있다. 따라서 위에 언급한 단점들을 극복하기 위하여 무기충전재(inorganic filler)를 보강재로 사용한 고충진 복합재료가 수복용 치과재료로 개발되었다.
Nano-Imprint 또는 Micro Contact Printing과 같은 Advanced Digital Printing기술이 핵심기술로 발전 할 것이며, 궁극적인 저원가화를 위한 Roll-to-Roll 장비(Printing 및 성막장비 포함)로 진화할 것임. 한편, Barrier Coating 및 각종 기능성 Coating이 되어진 Plastic 기판은 Flexible Display를 가능하게 하는 핵심 부품으로, 향후 추가적
nano seconds
The average distance <<10 nanometer.
The exciton diffuses to the interface between two layers
The exciton is saparated by an electron and a hole
(0.05~1.5eV)
1. The concentration of carrier is higher at interface than surrounding. So, the carrier diffuses.
The built-in potential by different work functions of the electrodes affects.
1. sp2-hybridization of the v